Cisco 300 Series User Manual

RSA and Certificate Commands
827 OL-32830-01 Command Line Interface Reference Guide
43
m5ZZPhIwl8ARSPXwhVdJexFjbnmvcacqjPG8pIiRV6LkxryGF2bVU3jKEipcZa
g+uNpyTkDt3ZVU72pjz/fa8TF0n3
-----END CERTIFICATE REQUEST-----
43.7 crypto certificate import
The crypto certificate import Global Configuration mode command imports a
certificate signed by a Certification Authority for HTTPS. In addition, the RSA
key-pair can also be imported.
Use the no form of the command to delete the user-defined keys and certificate.
Syntax
crypto certificate
number import
encrypted crypto certificate
number import
no crypto certificate number
Parameters
• number —Specifies the certificate number. (Range: 1–2).
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
To end the session (return to the command line to enter the next command), enter a
blank line.
The imported certificate must be based on a certificate request created by the
crypto cerificate request command.
If only the certificate is imported, and the public key found in the certificate does
not match the device's SSL RSA key, the command fails. If both the public key and
the certificate are imported, and the public key found in the certificate does not
match the imported RSA key, the command fails.
This command is saved in the Running configuration file.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48