Cisco 300 Series User Manual

SSD Commands
935 OL-32830-01 Command Line Interface Reference Guide
47
If a user-defined passphrase in Unrestricted mode are configured, it is highly
recommended to enable SSD File Integrity Control. Enabling SSD File Integrity
Control protects configuration files from tampering.
Examples
console(ssd-config)# ssd file passphrase control restricted
console(ssd-config)# no ssd file passphrase control
47.8 ssd file integrity control
To instruct the device to protect newly-generated configuration files that contain
encrypted sensitive data from tampering, use ssd file integrity control command in
SSD Configuration mode.
To disable Integrity Control, use no ssd file integrity control.
Syntax
ssd file integrity control
enabled
no ssd file integrity control
Parameters
• enabled—Enable file integrity control to protect newly-generated
configuration files from tampering.
Default
The default file input control is disable.
Command Mode
SSD Configuration mode.
User Guidelines
TA user can protect a configuration file from being tampered by creating the file
with File Integrity Control enabled. It is recommended that File Integrity Control be
enabled when a devices users a user-defined passphrase with Unrestricted
Configuration File Passphrase Control.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48