Cisco 300 Series

ACL Commands
OL-32830-01 Command Line Interface Reference Guide 138
4
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, port-channel or VLAN.
Command Mode
Privileged EXEC mode
Example
Interface ACLs
--------- -----------------------
gi11 blockcdp, blockvtp
gi12 Ingress: server1
4.17 clear access-lists counters
Use the clear access-lists counters Privileged EXEC mode command to clear
access-lists (ACLs) counters.
Syntax
clear access-lists counters
[interface-id]
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# clear access-lists counters gi11