Cisco 300 Series User Manual

System Management Commands
979 OL-32830-01 Command Line Interface Reference Guide
50
@
ssd-control-start
50.8 show cpu input rate
To display the rate of input frames to the CPU in packets per seconds (pps), use
the show cpu input rate EXEC mode command.
Syntax
show cpu input rate
Parameters
This command has no arguments or keywords.
Command Mode
User EXEC mode
Example
The following example displays CPU input rate information.
switchxxxxxx> show cpu input rate
Input Rate to CPU is 1030 pps.
50.9 show cpu utilization
To display information about CPU utilization, use the show cpu utilization
Privileged EXEC mode command.
Syntax
show cpu utilization
Parameters
This command has no arguments or keywords.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48