Cisco 300 Series User Manual

System Management Commands
OL-32830-01 Command Line Interface Reference Guide 984
50
Command Mode
User EXEC mode
User Guidelines
The show sessions command displays Telnet sessions to remote hosts opened by
the current Telnet session to the local device. It does not display Telnet sessions to
remote hosts opened by other Telnet sessions to the local device.
Example
The following example displays open Telnet sessions.
The following table describes significant fields shown above.
50.14 show system
The show system EXEC mode command displays system information.
Syntax
show system
switchxxxxxx> show sessions
Connection
----------
1
2
Host
-------------
Remote router
172.16.1.2
Address
----------
172.16.1.1
172.16.1.2
Port
-----
23
23
Byte
----
89
8
Field Description
Connection The connection number.
Host The remote host to which the device is connected
through a Telnet session.
Address The remote host IP address.
Port The Telnet TCP port number.
Byte The number of unread bytes for the user to see on
the connection.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48