Cisco 300 Series User Manual

System Management Commands
OL-32830-01 Command Line Interface Reference Guide 992
50
Unit Sensor Temperature(c)
Status
--- --------- --------------
1 OK 37
2 Failure
3 OK 68
Example 4: For systems with multiple sensor statuses
Unit/ Sensor Temperature(c) Alarm
Sensor Status Temp(C)
--- --------- -------------- -------
1/1 OK 37 60
1/2 Failure 60
2/1 OK 68 65
50.22 show system id
To display the system identity information, use the show system id EXEC mode
command.
Syntax
show system id
Command Mode
User EXEC mode
Example
The following example displays the system identity information.
switchxxxxxx> show system id
serial number 114

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48