Cisco 300 Series User Manual

EEE Commands
OL-32830-01 Command Line Interface Reference Guide 382
17
Parameters
This command has no arguments or keywords.
Default Configuration
Enabled
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
Enabling EEE LLDP advertisement enables devices to choose and change system
wake-up times in order to get the optimal energy saving mode.
Example
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# eee lldp enable
17.4 show eee
Use the show eee EXEC command to display EEE information.
Syntax
show eee
[interface-id]
Parameters
interface-id—(Optional) Specify an Ethernet port.
Defaults
None
Command Mode
Privileged EXEC mode
Examples

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48