Cisco 300 Series

7
OL-32830-01 Command Line Interface Reference Guide 198
Bonjour Commands
7. 0
7.1 bonjour enable
Use the bonjour enable Global Configuration mode command to enable Bonjour
globally. Use the no format of the command to disable Bonjour globally.
Syntax
bonjour enable
no bonjour enable.
Default Configuration
Enable
Command Mode
Global Configuration mode
Examples
switchxxxxxx(config)# bonjour enable
7.2 bonjour interface range
Use the bonjour interface range Global Configuration mode command to add L2
interfaces to the Bonjour L2 interface list. Use the no format of the command to
remove L2 interfaces from this list.
Syntax
bonjour interface range {
interface-list }