Cisco 300 Series User Manual

Remote Network Monitoring (RMON) Commands
803 OL-32830-01 Command Line Interface Reference Guide
41
switchxxxxxx(config)# rmon event 10 log
41.5 show rmon events
To display the RMON event table, use the show rmon events Privileged EXEC
mode command.
Syntax
show rmon events
Parameters
This command has no arguments or keywords.
Command Mode
Privileged EXEC mode
Example
The following example displays the RMON event table.
The following table describes significant fields shown in the display:
switchxxxxxx# show rmon events
Index
-----
1
2
Description
-----------
Errors
High
Broadcast
Type
------
Log
Log
Trap
Community
---------
router
Owner
------
CLI
Manager
Last time sent
------------------
Jan 18 2006 23:58:17
Jan 18 2006 23:59:48
Field Description
Index Unique index that identifies this event.
Description Comment describing this event.
Type Type of notification that the device generates about this event.
Can have the following values: none, log, trap, log-trap. In the
case of log, an entry is made in the log table for each event. In
the case of trap, an SNMP trap is sent to one or more
management stations.
Community If an SNMP trap is to be sent, it is sent with the SNMP community
string specified by this octet string.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48