Cisco 300 Series User Manual

DHCP Relay Commands
OL-32830-01 Command Line Interface Reference Guide 278
11
11.7 show ip dhcp information option
The show ip dhcp information option EXEC mode command displays the DHCP
Option 82 configuration.
Syntax
show ip dhcp information option
Parameters
N/A
Default Configuration
N/A
Command Mode
User EXEC mode
Example
The following example displays the DHCP Option 82 configuration.
switchxxxxxx# show ip dhcp information option
Relay agent Information option is Enabled

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48