Cisco 300 Series User Manual

Quality of Service (QoS) Commands
785 OL-32830-01 Command Line Interface Reference Guide
39
Command Mode
Global Configuration mode
Example
The following example enables counting in-profile and out-of-profile on the
interface.
switchxxxxxx(config)# qos statistics aggregate-policer policer1
39.38 qos statistics queues
Use the qos statistics queues Global Configuration mode command to enable
QoS statistics for output queues. Use the no form of this command to disable QoS
statistics for output queues.
Syntax
qos statistics queues
set { queue | all} {dp | all} {interface | all}
no qos statistics queues set
Parameters
• set—Specifies the counter set number.
• interface—Specifies the Ethernet port.
• queue—Specifies the output queue number.
• dp—Specifies the drop precedence. The available values are: high, low.
Default Configuration
Set 1: All interfaces, all queues, high DP.
Set 2: All interfaces, all queues, low DP.
Command Mode
Global Configuration mode

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48