Cisco 300 Series User Manual

IPv6 First Hop Security
OL-32830-01 Command Line Interface Reference Guide 584
25
Syntax
show ipv6 nd raguard
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
The following example gives an example of the show ipv6 nd raguard command
output:
switchxxxxxx# show ipv6 nd raguard
IPv6 RA Guard is enabled on VLANs:1-4,6,7,100-120
"Managed address configuration" flag (M-flag:) off
"Other configuration" flag (O-flag): disabled
Hop Limit:
minimum: 10
maximum: 100
Default Router Preference:
minimum: 1
maximum: 1
25.75 show ipv6 nd raguard policy
To display a router advertisements (RAs) guard policy on all ports configured with
the RA guard feature, use the show ipv6 nd raguard policy command in privileged
EXEC mode.
Syntax
show ipv6 nd raguard policy [
policy-name | active]

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48