Cisco 300 Series User Manual

Clock Commands
OL-32830-01 Command Line Interface Reference Guide 228
9
Example
switchxxxxxx(config)# time-range http-allowed
switchxxxxxx(config-time-range)# absolute start 12:00 1 jan 2005
switchxxxxxx(config-time-range)# absolute end 12:00 31 dec 2005
9.2 clock dhcp timezone
To specify that the timezone and the Summer Time (Daylight Saving Time) of the
system can be taken from the DHCP Timezone option, use the clock dhcp
timezone command in Global Configuration mode. To restore the default
configuration, use the no form of this command.
Syntax
clock dhcp timezone
no clock dhcp timezone
Parameters
N/A
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
The TimeZone taken from the DHCP server has precedence over the static
TimeZone.
The Summer Time taken from the DHCP server has precedence over static
SummerTime.
The TimeZone and SummerTime remain effective after the IP address lease time
has expired.
The TimeZone and SummerTime that are taken from the DHCP server are cleared
after reboot.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48