Cisco 300 Series User Manual

Green Ethernet
421 OL-32830-01 Command Line Interface Reference Guide
19
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# green-ethernet short-reach
19.4 green-ethernet short-reach (interface)
Use the green-ethernet short-reach Interface Configuration mode command to
enable green-ethernet short-reach mode on a port. Use the no form of this
command to disable it on a port.
Syntax
green-ethernet short-reach
no green-ethernet short-reach
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
The VCT length check can be performed only on a copper port operating at a
speed of 1000 Mbps. If the media is not copper or the link speed is not 1000,
Mbps Short-Reach mode is not applied.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48