Cisco 300 Series User Manual

Management ACL Commands
703 OL-32830-01 Command Line Interface Reference Guide
33
33.5 show management access-list
To display management access lists (ACLs), use the show management
access-list Privileged EXEC mode command.
Syntax
show management access-list [
name ]
Parameters
name—(Optional) Specifies the name of a management access list to be
displayed. (Length: 1–32 characters)
Default Configuration
All management ACLs are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the mlist management ACL.
switchxxxxxx# show management access-list mlist
m1
--
deny service telnet
permit gi11 service telnet
! (Note: all other access implicitly denied)
console(config-macl)#
33.6 show management access-class
To display information about the active management access list (ACLs), use the
show management access-class Privileged EXEC mode command.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48