Cisco 300 Series

Virtual Local Area Network (VLAN) Commands
OL-32830-01 Command Line Interface Reference Guide 1060
56
• detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
Show all protected interfaces. If detailed is not used, only present ports are
displayed.
Command Mode
User EXEC mode
Example
switchxxxxxx# show interfaces protected-ports
56.11 switchport community
Use the switchport community Interface Configuration mode command to
associate a protected port with a community. Use the no form of this command to
return to the default.
Syntax
switchport community
community
no switchport community
Parameters
• community —Specifies the community number. (range: 1 - 31).
Default Configuration
The port is not associated with a community.
Interface
---------
gi11
gi12
gi13
gi14
State
-------------
Protected
Protected
Unprotected
Unprotected
Community
---------
1
Isolated
20
Isolated