Cisco 300 Series User Manual

Remote Network Monitoring (RMON) Commands
OL-32830-01 Command Line Interface Reference Guide 804
41
41.6 show rmon log
To display the RMON log table, use the show rmon log Privileged EXEC mode
command.
Syntax
show rmon log [
event ]
Parameters
event—(Optional) Specifies the event index. (Range: 0–65535)
Command Mode
Privileged EXEC mode
Example
The following example displays event 1 in the RMON log table.
Owner The entity that configured this event.
Last time
sent
The time this entry last generated an event. If this entry has not
generated any events, this value is zero.
switchxxxxxx# show rmon log 1
Maximum table size: 500 (800 after reset)
Event
-----
1
Description
--------------
MIB Var.:
1.3.6.1.2.1.2.2.1.10.
53, Delta, Rising,
Actual Val: 800,
Thres.Set: 100,
Interval (sec):1
Time
-------------------
Jan 18 2006 23:48:19
Field Description

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48