Cisco 300 Series User Manual

DHCPv6 Commands
OL-32830-01 Command Line Interface Reference Guide 350
14
Command Mode
User EXEC mode
Privileged EXEC mode
User Guidelines
If no interfaces are specified in the command, all interfaces on which DHCP for
IPv6 (client or server) is enabled are displayed. If an interface is specified in the
command, only information about the specified interface is displayed.
Examples
Example 1. The following is sample output from this command when only the
Stateless service is enabled:
switchxxxxxx# show ipv6 dhcp interface
VLAN 100 is in client mode
DHCP Operational mode is enabled
Stateless Service is enabled
Reconfigure service is enabled
Information Refresh Minimum Time: 600 seconds
Information Refresh Time: 86400 seconds
Received Information Refresh Time: 3600 seconds
Remain Information Refresh Time: 411 seconds
DHCP server:
Address FE80::202:FCFF:FEA1:7439, DUID 000300010002FCA17400
Preference: 20
DNS Servers: 1001::1, 2001::10
DNS Domain Search List: company.com beta.org
SNTP Servers: 2004::1
POSIX Timezone string: EST5EDT4,M3.2.0/02:00,M11.1.0/02:00
Configuration Server: config.company.com
Configuration Path Name: qqq/config/aaa_config.dat
Indirect Image Path Name: qqq/config/aaa_image_name.txt

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48