Cisco 300 Series User Manual

44
OL-32830-01 Command Line Interface Reference Guide 835
Smartport Commands
44.0
44.1 macro auto (Global)
The macro auto Global Configuration mode command sets the Auto Smartports
administrative global state. The no format of the command returns to the default.
Syntax
macro auto {enabled | disabled | controlled}
no macro auto
Parameters
• enabled—Auto Smartport administrative global and operational states are
enabled.
• disabled—Auto Smartport administrative global and operational states are
disabled.
• controlled—Auto Smartport administrative global and operational states
are enabled when Auto Voice VLAN is in operation.
Default Configuration
Administrative state is controlled.
Command Mode
Global Configuration mode
User Guidelines
Regardless of the status of Auto Smartport, you can always manually apply a
Smartport macro to its associated Smartport type. A Smartport macro is either a
built-in macro or a user-defined macro. You can define and apply a macro using
the CLI commands presented in the Macro Commands section.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48