Cisco 300 Series

IPv6 First Hop Security
OL-32830-01 Command Line Interface Reference Guide 488
25
Example
The following example clears IPv6 First Hop Security counters on port gi11
switchxxxxxx# clear ipv6 first hop security counters interface gi11
25.4 clear ipv6 first hop security error
counters
To clear IPv6 First Hop Security global error counters, use the clear ipv6 first hop
security error counters command in privileged EXEC mode.
Syntax
clear ipv6 first hop security error counters
Parameters
N/A
Command Mode
Privileged EXEC mode
User Guidelines
This command clears global error counters.
Example
The following example clears IPv6 First Hop Security error counters:
switchxxxxxx# clear ipv6 first hop security error counters
25.5 clear ipv6 neighbor binding prefix table
To remove dynamic entries from the Neighbor Prefix table, use the clear ipv6
neighbor binding prefix table command in Privilege EXEC configuration mode.