Cisco 300 Series User Manual

Quality of Service (QoS) Commands
783 OL-32830-01 Command Line Interface Reference Guide
39
5 : 50 51 52 53 54 55 56 57 58 59
6 : 21 21 21
39.35 clear qos statistics
Use the clear qos statistics Privileged EXEC mode command to clear the QoS
statistics counters.
Syntax
clear qos statistics
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example clears the QoS statistics counters.
switchxxxxxx(config)# clear qos statistics
39.36 qos statistics policer
Use the qos statistics policer Interface (Ethernet, Port Channel) Configuration
mode mode command to enable counting in-profile and out-of-profile. Use the no
form of this command to disable counting.
This command is relevant only when policers are defined.
Syntax
qos statistics policer
policy-map-name class-map-name

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48