Cisco 300 Series User Manual

802.1X Commands
47 OL-32830-01 Command Line Interface Reference Guide
2
User Guidelines
Open Access or Monitoring mode allows clients or devices to gain network
access before authentication is performed. In the mode the switch performs
failure replies received from a Radius server as success.
Example
The following example enables open mode on interface gi11:
switchxxxxxx(config)# interface gi1 1
switchxxxxxx(config-if)# authentication open
2.3 clear dot1x statistics
Use the clear dot1x statistics Privileged EXEC mode command to clear 802.1X
statistics.
Syntax
clear dot1x statistics [i
nterface-id ]
Parameters
• interface-id —Specify an Ethernet port ID.
Default Configuration
Statistics on all ports are cleared.
Command Mode
Privileged EXEC mode
User Guidelines
This command clears all the counters displayed in the
show dot1x and show dot1x
statistics
command.
Example
switchxxxxxx# clear dot1x statistics

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48