Quality of Service (QoS) Commands
769 OL-32830-01 Command Line Interface Reference Guide
39
This setting will take effect only after copying running configuration to startu
p configuration and resetting the device
switchxxxxxx(config)#
39.25 show qos wrr-queue wrtd
Use the show qos wrr-queue wrtd Privileged EXEC mode command to display the
Weighted Random Tail Drop (WRTD) configuration.
Syntax
show qos wrr-queue wrtd
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx(config)#
show qos wrr-queue wrtd
Weighted Random Tail Drop is disabled
Weighted Random Tail Drop will be enabled after reset
39.26 show qos interface
Use the show qos interface Privileged EXEC mode command to display Quality of
Service (QoS) information on the interface.
Syntax
show qos interface [buffers | queueing | policers | shapers | rate-limit] [
interface-id
]
To Next Page
Loading...
