Cisco 300 Series User Manual

System Management Commands
OL-32830-01 Command Line Interface Reference Guide 982
50
TEMPERATURE is Warning
50.11 show inventory
To display system information, use the show inventory EXEC mode command.
Syntax
show inventory [entity]
Parameters
entity—Specifies the entity to be displayed. It can be a number (1 - 8 ) for a
specific unit number, or an interface (Ethernet) name.
Command Mode
User EXEC mode
Examples
Example 1 - The following example displays all the entities in a standalone system.
switchxxxxxx> show inventory
NAME: "1", DESCR: "52-Port Gigabit PoE Stackable Managed Switch"
PID: SRW224G4P-K9, VID: V01, SN: 123456789
Example 2 - The following example displays a specific entity in a standalone
system.
switchxxxxxx> show inventory gigabitethernet2/1/49
NAME: "GigabitEthernet2/1/49", DESCR: "1000M base-LX Mini-GBIC SFP Transceiver"
PID: MGBLX1,VID: V01, SN: AGC1525UR7G
50.12 show reload
To display whether there is a pending reload for status of the device, use the show
reload Privileged EXEC mode command.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48