Cisco 300 Series User Manual

CDP Commands
225 OL-32830-01 Command Line Interface Reference Guide
8
8.21 show cdp traffic
The show cdp traffic Privileged EXEC mode command displays the CDP counters,
including the number of packets sent and received and checksum errors.
Syntax
show cdp traffic [global |
interface-id ]
Parameters
• global—Display only the global counters
• interaface-id —Port for which counters should be displayed.
Command Mode
Privileged EXEC mode
User Guidelines
Use the command show cdp traffic without parameters to display all the counters.
Use the show cdp traffic global to display only the global counters.
Use the show cdp traffic
interface-id command to display the counters of the
given port.
Example
switchxxxxxx# show cdp traffic
CDP Global counters:
Total packets output: 81684, Input: 81790
Hdr syntax: 0, Chksum error: 0, Encaps: 0
No memory: 0, Invalid packet: 0
CDP version 1 advertisements output: 100, Input 0
CDP version 2 advertisements output: 81784, Input 0
gi11
Total packets output: 81684, Input: 81790
Hdr syntax: 0, Chksum error: 0, Encaps: 0
No memory: 0, Invalid packet: 0

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48