Cisco 300 Series User Manual

Address Table Commands
183 OL-32830-01 Command Line Interface Reference Guide
5
Command Mode
Privileged EXEC mode
Example
The following example displays the Multicast configuration for VLAN 1.
5.32 show bridge multicast unregistered
To display the unregistered Multicast filtering configuration, use the show bridge
multicast unregistered Privileged EXEC mode command.
Syntax
show bridge multicast unregistered
[interface-id]
Parameters
interface-id—(Optional) Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or Port-channel.
Default Configuration
Display for all interfaces.
Command Mode
Privileged EXEC mode
switchxxxxxx# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Forward-All
Port
-----
gi11
gi12
gi13
Static
---------
Forbidden
Forward
-
Status
------
Filter
Forward(s)
Forward(d)

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48