DHCP Server Commands
OL-32830-01 Command Line Interface Reference Guide 286
12
Syntax
domain-name
domain
no domain-name
Parameters
•
domain
—Specifies the DHCP client domain name string. (Length: 1–32
characters).
Command Mode
DHCP Pool Network Configuration mode
DHCP Pool Host Configuration mode
Default Configuration
No domain name is defined.
Example
The following example specifies yahoo.com as the DHCP client domain name
string.
switchxxxxxx(config-dhcp)#
domain-name
yahoo.com
12.9 ip dhcp excluded-address
To specify IP addresses that a DHCP server must not assign to DHCP clients, use
the ip dhcp excluded-address command in Global Configuration mode. To remove
the excluded IP addresses, use the no form of this command.
Syntax
ip dhcp excluded-address
low-address
[
high-address
]
no ip dhcp excluded-address
low-address
[
high-address
]
Parameters
•
low-address
—Specifies the excluded IP address, or first IP address in an
excluded address range.
To Next Page
Loading...
