Cisco 300 Series

System Management Commands
987 OL-32830-01 Command Line Interface Reference Guide
50
Language Name Unicode Name Code Num of Sections
--------------- -------------- ------ -------------
English English en-US 2
Japanese µùѵ£¼F¬P ja-JP 2
50.17 show system tcam utilization
To display the Ternary Content Addressable Memory (TCAM) utilization, use the
show system tcam utilization EXEC mode command.
Syntax
show system tcam utilization
Parameters
unit-id—(Optional) Specifies the unit number. (Range: 1–8)
Default Usage
None
Command Mode
User EXEC mode
Example
The following example displays TCAM utilization information.
50.18 show services tcp-udp
To display information about the active TCP and UDP services, use the show
services tcp-udp Privileged EXEC mode command.
switchxxxxxx> show system tcam utilization
TCAM utilization: 58%