Cisco 300 Series User Manual

MLD Snooping Commands
OL-32830-01 Command Line Interface Reference Guide 716
34
Example
The following example shows the output for show ipv6 mld snooping groups.
34.13 show ipv6 mld snooping interface
To display the IPv6 MLD snooping configuration for a specific VLAN, use the show
ipv6 mld snooping interface EXEC mode command in User EXEC mode.
Syntax
show ipv6 mld snooping interface
vlan-id
Parameters
• vlan-id —Specifies the VLAN ID.
Default Configuration
Display information for all VLANs.
Command Mode
User EXEC mode
switchxxxxxx# show ipv6 mld snooping groups
VLAN
----
1
1
19
19
19
Group Address
--------
FF12::3
FF12::3
FF12::8
FF12::8
FF12::8
Source Address
---------------------
FE80::201:C9FF:FE40:8001
FE80::201:C9FF:FE40:8002
FE80::201:C9FF:FE40:8003
FE80::201:C9FF:FE40:8004
FE80::201:C9FF:FE40:8005
Include Ports
-----------
gi11
gi12
gi14
gi11
gi110-11
Exclude Ports
----------
gi12
gi13
Compatibility
Mode
-------------
1
1
2
2
2
MLD Reporters that are forbidden statically:
VLAN
----
1
19
Group Address
-----------
FF12::3
FF12::8
Source Address
---------------------
FE80::201:C9FF:FE40:8001
FE80::201:C9FF:FE40:8001
Ports
--------
gi13
gi14

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48