Cisco 300 Series

Ethernet Configuration Commands
417 OL-32830-01 Command Line Interface Reference Guide
18
Parameters
unknown-unicast—(Optional) Specifies also the count of unknown Unicast
packets.
Default Configuration
Disabled
Command Mode
Interface (Ethernet) Configuration mode
Example
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# storm-control include-multicast
18.29 show storm-control
To display the configuration of storm control for a port, use the show storm-control
Privileged EXEC mode command.
Syntax
show storm-control
[interface-id]
Parameters
interface-id—(Optional) Specifies the Ethernet port.
Default Configuration
Display for all interfaces.
Command Mode
Privileged EXEC mode