Cisco 300 Series User Manual

Virtual Local Area Network (VLAN) Commands
1073 OL-32830-01 Command Line Interface Reference Guide
56
switchxxxxxx(config-if)# switchport mode general
switchxxxxxx(config-if)# switchport general map macs-group 1 vlan 2
switchxxxxxx(config-if)# switchport general map macs-group 2 vlan 3
56.23 show vlan macs-groups
Use the show vlan macs-groups EXEC mode command to display the MAC
addresses that belong to the defined MAC-based classification rules.
Syntax
show vlan macs-groups
Parameters
N/A
Default Configuration
N/A
Command Mode
User EXEC mode
Example
The following example displays defined MAC-based classification rules.
switchxxxxxx# show vlan macs-groups
MAC Address Mask Group ID
--------------------- --------------------- ---------------------
00:12:34:56:78:90 20 22
00:60:70:4c:73:ff 40 1

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48