Cisco 300 Series

Virtual Local Area Network (VLAN) Commands
OL-32830-01 Command Line Interface Reference Guide 1090
56
vlan prohibit-internal-usage 4000-4107
56.37 show vlan internal usage
Use the show vlan internal usage Privileged EXEC mode command to display a list
of VLANs used internally by the device (defined by the user).
Syntax
show vlan internal usage
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example displays VLANs used internally by the switch:
show vlan internal usage
User Reserved VLAN list after reset: 4010,4012,4080-4094
Current User Reserved VLAN list: 4010,4012,4090-4094
VLAN Usage
---- --------
4089 gi12
4088 gi13
4087 tunnel 1
4086 802.1x