Cisco 300 Series User Manual

46
OL-32830-01 Command Line Interface Reference Guide 888
Spanning-Tree Commands
46.0
46.1 spanning-tree
Use the spanning-tree Global Configuration mode command to enable
spanning-tree functionality. Use the no form of this command to disable the
spanning-tree functionality.
Syntax
spanning-tree
no spanning-tree
Parameters
N/A
Default Configuration
Spanning-tree is enabled.
Command Mode
Global Configuration mode
Example
The following example enables spanning-tree functionality.
switchxxxxxx(config)# spanning-tree

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48