Cisco 300 Series User Manual

Clock Commands
235 OL-32830-01 Command Line Interface Reference Guide
9
Parameters
• day-of-the-week —The starting day that the associated time range is in
effect. The second occurrence is the ending day the associated statement
is in effect. The second occurrence can be the following week (see
description in the User Guidelines). Possible values are: mon, tue, wed, thu,
fri, sat, and sun.
• hh:mm —The first occurrence of this argument is the starting hours:minutes
(military format) that the associated time range is in effect. The second
occurrence is the ending hours:minutes (military format) the associated
statement is in effect. The second occurrence can be at the following day
(see description in the User Guidelines). (Range: 0–23, mm: 0–59)
• list day-of-the-week1 —Specifies a list of days that the time range is in
effect.
Default Configuration
There is no periodic time when the time range is in effect.
Command Mode
Time-range Configuration mode
User Guidelines
The second occurrence of the day can be at the following week, e.g.
Thursday–Monday means that the time range is effective on Thursday, Friday,
Saturday, Sunday, and Monday.
The second occurrence of the time can be on the following day, e.g. “22:00–2:00”.
Example
switchxxxxxx(config)# time-range http-allowed
switchxxxxxx(config-time-range)# periodic mon 12:00 to wed 12:00
9.8 sntp anycast client enable
To enable the SNTP Anycast client, use the sntp anycast client enable command in
Global Configuration mode. To restore the default configuration, use the no form of
this command.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48