Clock Commands
OL-32830-01 Command Line Interface Reference Guide 252
9
9.23 show time-range
To display the time range configuration, use the show time-range command in
User EXEC mode.
Syntax
show time-range
time-range-name
Parameters
•
time-range-name
—Specifies the name of an existing time range.
Command Mode
User EXEC mode
Example
switchxxxxxx#
show time-range
http-allowed
--------------
absolute start 12:00 1 Jan 2005 end 12:00 31 Dec 2005
periodic Monday 12:00 to Wednesday 12:00
9.24 time-range
To define time ranges and to enter to Time-range Configuration mode, use the
time-range command to define time ranges and to enter to Time-range
Configuration mode in Global Configuration mode. To restore the default
configuration, use the no form of this command.
Syntax
time-range
time-range-name
no time-range
time-range-name
Parameters
•
time-range-name
—Specifies the name for the time range. (Range: 1–32
characters).
To Next Page
Loading...
