Cisco 300 Series User Manual

System Management Commands
995 OL-32830-01 Command Line Interface Reference Guide
50
Example
The following example displays system version information.
switchxxxxxx> show version
SW Version 1.1.0.5 ( date 15-Sep-2010 time 10:31:33 )
Boot Version 1.1.0.2 ( date 04-Sep-2010 time 21:51:53 )
HW Version
50.26 show version md5
To display external MD5 digest of firmware, use the show version md5 EXEC
mode command.
Syntax
show version md5
Command Mode
User EXEC mode
Example
switchxxxxxx> show version md5
Filename Status MD5 Digest
-------- ------- ----------------------------------
image1 Active 23FA000012857D8855AABC7577AB5562
image2 Not Active 23FA000012857D8855AABEA7451265456
boot 23FA000012857D8855AABC7577AB8999
50.27 system recovery
To set the system to automatically recover from temperature that reached the
critical threshold, use the system recovery Global Configuration command.
To return to disable automatic recovery, use the no form of the command.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48