EasyManuals Logo

Cisco 300 Series User Manual

Cisco 300 Series
1117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #268 background imageLoading...
Page #268 background image
Configuration and Image File Commands
OL-32830-01 Command Line Interface Reference Guide 268
10
Example
The following example displays the active system image file that was loaded by
the device at startup and the system image file that will be loaded after rebooting
the switch:
switchxxxxxx#
show bootvar
Image Filename Version Date Status
----- --------- --------- --------------------- -----------
1 image-1 1.1.0.73 19-Jun-2011 18:10:49 Not active*
2 image-2 1.1.0.73 19-Jun-2011 18:10:49 Active
"*" designates that the image was selected for the next boot
10.11 service mirror-configuration
Use the service mirror-configuration Global Configuration mode command to
enable the mirror-configuration service. Use no service mirror-configuration
command to disable the service.
Syntax
service mirror-configuration
no service mirror-configuration
Parameters
This command has no arguments or keywords.
Default Configuration
The default configuration is mirror-configuration service enabled.
Command Mode
Global Configuration mode

Table of Contents

Other manuals for Cisco 300 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 300 Series and is the answer not in the manual?

Cisco 300 Series Specifications

General IconGeneral
ModelCisco 300 Series
CategorySwitch
DimensionsVaries by model
WeightVaries by model
Power over Ethernet (PoE)Available on select models
ManagementWeb-based GUI, SNMP, CLI
VLANsUp to 256
Security FeaturesACLs, 802.1X, Port Security
Humidity10% to 90% non-condensing
Ports8, 16, 24, 48

Related product manuals