Cisco 300 Series User Manual

IPv6 First Hop Security
OL-32830-01 Command Line Interface Reference Guide 590
25
1027 2002:1::/64 dynamic A 230
25.79 show ipv6 neighbor binding table
To display contents of the Binding table, use the show ipv6 neighbor binding table
command in Privilege EXEC configuration mode.
Syntax
show ipv6 neighbor binding table [vlan
vlan-id ] [interface interface-id ] [ipv6
ipv6-address ] [mac mac-address ]
Parameters
• vlan vlan-id —Displays the Binding table entries that match the specified
VLAN.
• interface interface-id —Displays the Binding table entries that match the
specified port (Ethernet port or port channel).
• ipv6 ipv6-address —Displays the Binding table entries that match the
specified IPv6 address.
• mac mac-address —Displays the Binding table entries that match the
specified MAC address.
Command Mode
Privileged EXEC mode
User Guidelines
This displays the contents of the Binding table. The display output can be
specified by the specified VLAN, port, IPv6 address, or MAC address. If no
keywords or arguments are entered, all Binding table contents are displayed.
Any keyword and argument combinations are allowed.
Example
The following example displays the contents of the Binding table:
switchxxxxxx# show ipv6 neighbor binding table
Binding Table has 4 entries

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48