Cisco 300 Series User Manual

Introduction
29 OL-32830-01 Command Line Interface Reference Guide
1
Configuration mode. The interface Global Configuration command is used
to enter this mode.
• Line Interface—Contains commands used to configure the management
connections for the console, Telnet and SSH. These include commands such
as line timeout settings, etc. The line Global Configuration command is used
to enter the Line Configuration command mode.
• VLAN Database—Contains commands used to configure a VLAN as a
whole. The vlan database Global Configuration mode command is used to
enter the VLAN Database Interface Configuration mode.
• Management Access List—Contains commands used to define
management access-lists. The management access-list Global
Configuration mode command is used to enter the Management Access
List Configuration mode.
• Port Channel—Contains commands used to configure port-channels; for
example, assigning ports to a port-channel. Most of these commands are
the same as the commands in the Ethernet interface mode, and are used to
manage the member ports as a single entity. The interface port-channel
Global Configuration mode command is used to enter the Port Channel
Interface Configuration mode.
• QoS—Contains commands related to service definitions. The qos Global
Configuration mode command is used to enter the QoS services
configuration mode.
• MAC Access-List—Configures conditions required to allow traffic based
on MAC addresses. The mac access-list Global Configuration mode
command is used to enter the MAC access-list configuration mode.
To return from any Interface Configuration mode to the Global Configuration mode,
use the exit command.
Accessing the CLI
The CLI can be accessed from a terminal or computer by performing one of the
following tasks:
• Running a terminal application, such as HyperTerminal, on a computer that is
directly connected to the switch’s console port,
—or—

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48