Cisco 300 Series User Manual

IPv6 First Hop Security
545 OL-32830-01 Command Line Interface Reference Guide
25
Example
In the following example, the Neighbor Binding policy policy1 is attached to VLAN
100:
switchxxxxxx(config)# interface vlan 100
switchxxxxxx(config-if)# ipv6 neighbor binding attach-policy policy1
switchxxxxxx(config-if)# exit
25.44 ipv6 neighbor binding lifetime
To globally change the default of the Neighbor Binding table entry lifetime, use the
ipv6 neighbor binding lifetime command in Global Configuration mode. To return to
the default setting, use the no form of this command.
Syntax
ipv6 neighbor binding lifetime
value
no ipv6 neighbor binding lifetime
Parameters
• value —The lifetime in minutes. The range is from 1 through 60 minutes.
Default Configuration
5 minutes
Command Mode
Global Configuration mode
User Guidelines
Use the ipv6 neighbor binding lifetime command to change the default lifetime.
Example
The following example changes the lifetime for binding entries to 10 minutes:
switchxxxxxx(config)# ipv6 neighbor binding lifetime 10

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48