Cisco 300 Series User Manual

Green Ethernet
OL-32830-01 Command Line Interface Reference Guide 422
19
When the interface is set to enhanced mode, after the VCT length check has
completed and set the power to low, an active monitoring for errors is done
continuously. In the case of errors crossing a certain threshold, the PHY will be
reverted to long reach.
Note that EEE cannot be enabled if the Short-Reach mode is enabled.
Example
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)# green-ethernet short-reach
19.5 green-ethernet power-meter reset
Use the green-ethernet power meter reset Privileged EXEC mode command to
reset the power save meter.
Syntax
green-ethernet power-meter reset
Parameters
This command has no arguments or keywords.
Default Configuration
None
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# green-ethernet power-meter reset
19.6 show green-ethernet
To display green-ethernet configuration and information, use the show
green-ethernet Privileged EXEC mode command.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48