Cisco 300 Series User Manual

DHCP Snooping Commands
OL-32830-01 Command Line Interface Reference Guide 332
13
Syntax
ip
ip-address mac mac-address
no ip ip-address mac mac-address
Parameters
• ip-address —Specifies the IP address to be entered to the list.
• mac-address —Specifies the MAC address associated with the IP address.
Default Configuration
No static ARP binding is defined.
Command Mode
ARP-list Configuration mode
Example
The following example creates a static ARP binding.
switchxxxxxx(config)# ip arp inspection list create servers
switchxxxxxx(config-arp-list)#
ip 172.16.1.1 mac 0060.704C.7321
switchxxxxxx(config-arp-list)#
ip 172.16.1.2 mac 0060.704C.7322
13.26 ip arp inspection list assign
Use the ip arp inspection list assign Global Configuration mode command to
assign a static ARP binding list to a VLAN. Use the no form of this command to
delete the assignment.
Syntax
ip arp inspection list assign
vlan-id name
no ip arp inspection list assign vlan-id
Parameters
• vlan-id —Specifies the VLAN ID.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48