Cisco 300 Series User Manual

ACL Commands
139 OL-32830-01 Command Line Interface Reference Guide
4
4.18 show interfaces access-lists trapped
packets
Use the show interfaces access-lists trapped packets Privileged EXEC mode
command to display Access List (ACLs) trapped packets.
Syntax
show interfaces access-lists trapped packets
[interface-id | port-channel-number |
VLAN]
Parameters
• interface-id—Specifies an interface ID, the interface ID is an Ethernet port
port-channel.
• port-channel—Specifies a port-channel.
• VLAN—Specifies a VLAN
Command Mode
Privileged EXEC mode
User Guidelines
This command shows whether packets were trapped from ACE hits with logging
enable on an interface.
Examples
Example 1:
switchxxxxxx# show interfaces access-lists trapped packets
Ports/LAGs: gi11-gi13, ch1-ch3, ch4
VLANs: VLAN1, VLAN12-VLAN15
Packets were trapped globally due to lack of resources

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48