IPv6 First Hop Security
571 OL-32830-01 Command Line Interface Reference Guide
25
Example
The following example gives an example of the output of the show ipv6 dhcp
guard command:
switchxxxxxx#
show ipv6 dhcp guard
IPv6 DHCP Guard is enabled on VLANs:1-4,6,7,100-120
Default Preference
minimum: 10
maximum: 100
25.65 show ipv6 dhcp guard policy
To display DHCPv6 guard policies on all ports configured with the DHCPv6 guard
feature, use the show ipv6 dhcp guard policy command in privileged EXEC mode.
Syntax
show ipv6 dhcp guard policy [
policy-name
| active]
Parameters
•
policy-name
—Displays the DHCPv6 guard policy with the given name.
• active—Displays the attached DHCPv6 guard policies.
Command Mode
Privileged EXEC mode
User Guidelines
This command displays the options configured for the policy on all ports configured with the
DHCPv6 guard feature.
Examples
Example 1—The following example displays the Policy Configuration for a policy
named policy1:
switchxxxxxx#
show ipv6 dhcp guard policy
policy1
To Next Page
Loading...
