Cisco 300 Series User Manual

Auto-Update and Auto-Configuration
195 OL-32830-01 Command Line Interface Reference Guide
6
Example 2. The example specifies the IPv6 address of TFTP server:
switchxxxxxx# ip dhcp tftp-server ip address 3000:1::12
Example 3. The example specifies the IPv6 address of TFTP server:
switchxxxxxx# ip dhcp tftp-server ip address tftp-server.company.com
6.5 ip dhcp tftp-server file
Use the ip dhcp tftp-server file Global Configuration mode command to set the full
file name of the configuration file to be downloaded from the backup server when
it has not been received from the DHCP server. Use the no form of this command
to remove the name.
Syntax
ip dhcp tftp-server file
file-path
no ip dhcp tftp-server file
Parameters
• file-path —Full file path and name of the configuration file on the server.
Default Configuration
No file name
Command Mode
Global Configuration mode
User Guidelines
The backup server can be a TFTP server or an SCP server.
Examples
switchxxxxxx# ip dhcp tftp-server file conf/conf-file

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48