Cisco 300 Series

IPv6 First Hop Security
OL-32830-01 Command Line Interface Reference Guide 592
25
25.80 show ipv6 source guard
To display IPv6 Source Guard global configuration, use the show ipv6 source
guard command in Privilege EXEC configuration mode.
Syntax
show ipv6 source guard
Parameters
N/A
Command Mode
Privileged EXEC mode
User Guidelines
This displays IPv6 Source Guard global configuration.
Example
The following example gives an example of the show ipv6 source guard command
output:
switchxxxxxx# show ipv6 source guard
IPv6 Source Guard is enabled on VLANs:1-4,6,7,100-120
25.81 show ipv6 source guard policy
To display IPv6 Source Guard policies, use the show ipv6 source guard policy
command in Privilege EXEC configuration mode.
Syntax
show ipv6 source guard policy [
policy-name | active]
Parameters
• policy-name —IPv6 Source Guard policy name.
• active—Displays the attached IPv6 Source Guard policies.