Cisco 300 Series User Manual

SSD Commands
OL-32830-01 Command Line Interface Reference Guide 928
47
Please reenter SSD passphrase:**********
47.3 ssd rule
To configure an SSD rule, use ssd rule in SSD Configuration mode. A device grants
read permission of sensitive data to users based on the SSD rules. A user that is
granted Both or Plaintext read permission is also granted permission to enter SSD
Configuration mode.
To delete user-defined rules and restore default rules, use no ssd rule.
Syntax
[encrypted] SSD rule {
all | level-15 | default-user | user user-name }
{
secure | insecure | secure-xml-snmp | insecure-xml-snmp}
permission { encrypted-only | plaintext-only | both | exclude }
default - read { encrypted | plaintext | exclude }
no ssd rule [ {
all | level-15 | default-user | user user-name }
{ secure | insecure | secure-xml-snmp | insecure-xml-snmp }]
Command Mode
SSD Configuration mode.
Default Rules
The device has the following factory default rules:
Table 1: Default SSD Rules
Rule Key Rule Action
User Channel Read Permission Default Read Mode
level-15 secure-xml-snmp Plaintext Only Plaintext
level-15 secure Both Encrypted
level-15 insecure Both Encrypted
all insecure-xml-snmp Exclude Exclude
all secure Encrypted Only Encrypted
all insecure Encrypted Only Encrypted

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48