Cisco 300 Series User Manual

Address Table Commands
OL-32830-01 Command Line Interface Reference Guide 184
5
Example
The following example displays the unregistered Multicast configuration.
5.33 show ports security
To display the port-lock status, use the show ports security Privileged EXEC mode
command.
Syntax
show ports security
[interface-id | detailed ]
Parameters
• interface-id—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
• detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
Display for all interfaces. If detailed is not used, only present ports are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the port-lock status of all ports.
switchxxxxxx# show ports security
switchxxxxxx# show bridge multicast unregistered
Port
-------
gi11
gi12
gi13
Unregistered
-------------
Forward
Filter
Filter

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48