Cisco 300 Series User Manual

DHCP Snooping Commands
325 OL-32830-01 Command Line Interface Reference Guide
13
Parameters
• mac-address mac-address —Specifies a MAC address.
• ip-address ip-address —Specifies an IP address.
• vlan vlan-id —Specifies a VLAN ID.
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
User EXEC mode
Example
The following examples display the IP Source Guard status.
13.18 show ip source-guard inactive
Use the show ip source-guard inactive EXEC mode command to display the IP
Source Guard inactive addresses.
Syntax
show ip source-guard inactive
Parameters
N/A
Command Mode
User EXEC mode
switchxxxxxx# show ip source-guard status
IP source guard is globally enaabled.
Interface
-------
gi11
gi12
gi13
gi14
Filter
-----
IP
IP
IP
IP
Status
-------
Active
Active
Active
Inactive
IP Address
-----------
10.1.8.1
10.1.8.2
Deny all
MAC Address
---------------
0060.704C.73FF
0060.704C.7BC1
0060.704C.7BC3
VLAN
---
3
3
4
Type
-----
DHCP
Static
DHCP

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48