Cisco 300 Series User Manual

Management ACL Commands
OL-32830-01 Command Line Interface Reference Guide 702
33
switchxxxxxx(config-macl)# switchpermit
switchxxxxxx(config-macl)# switchexit
switchxxxxxx(config)# management access-class mlist
33.4 management access-class
To restrict management connections by defining the active management access
list (ACL), use the management access-class Global Configuration mode
command. To disable management connection restrictions, use the no form of this
command.
Syntax
management access-class {console-only |
name }
no management access-class
Parameters
• console-only—Specifies that the device can be managed only from the
console.
• name—Specifies the ACL name to be used. (Length: 1–32 characters)
Default Configuration
The default configuration is no management connection restrictions.
Command Mode
Global Configuration mode
Example
The following example defines an access list called mlist as the active
management access list.
switchxxxxxx(config)# management access-class mlist

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48